Rebound damping force
Turn the rebound damping force adjusting
screw ① in direction S to increase the
rebound damping force and thereby harden
the damping, and in direction F to decrease
the rebound damping force and thereby soften
the damping.
Compression damping force
Turn the compression damping force adjusting
screw ① (use 2.5 allen wrench) in direction
ⓐ to increase the compression damping force
and thereby harden the damping, and in
direction ⓑ to decrease the compression
damping force and thereby soften the
damping.
WARNING
:
·Suspension components become hot
during operation. Never touch the
compression damping force adjusting
screw, the rebound damping force
adjusting screw or the oil reservoir with
your bare hand or skin until suspension
components have cooled.
·Always adjust the shock absorber
assemblies on the left and right side to the
same setting. Uneven adjustment can
cause poor handling and loss of stability,
which could lead to an accident.
CHECKING THE TIRES
WARNING
:
To Next Page
Loading...