CHECKING THE WHEELS
1. Check:
• Wheels ①
Damage/bends Replace.
NOTE:
Always balance the wheel when a tire or
wheel has been changed or replaced.
WARNING
:
• Never attempt even small repairs to the
wheel.
• Ride conservatively after installing a tire
to
allow it to seat itself properly on the rim.
CHECKING AND
LUBRICATING THE CABLES
WARNING
:
A damaged cable sheath may cause
corrosion and interfere with the cable
movement. An unsafe condition may result
so replace a damaged cable as soon as
possible.
1. Check:
• cable sheath Damage Replace.
• cable operation Unsmooth operation
Lubricate or replace.
NOTE:
Hold the cable end up and apply several
drops of lubricant to the cable.
To Next Page
Loading...