NOTE:
Constant amperage chargers are not
suitable for charging MF batteries.
3. Install:
• battery
• Connect:
battery leads
NOTE:
First, connect the positive battery lead ①,
and then the negative battery lead ②.
• Check:
Battery terminals Dirt Clean with a wire
brush.
Loose connection Connect properly.
• Lubricate:
battery terminals
• Install:
battery case cover
• Close the hood.
CHECKING THE FUSES
NOTE:
Always turn off the main switch when
checking or replacing a fuse. Otherwise, a
short circuit may occur.
1. Remove:
• lift the hood up.
• battery case cover
2. Check:
To Next Page
Loading...