Keep it free from oil; otherwise, the
transparency of the glass, life of the bulb,
and luminous flux will be adversely
affected. If oil gets on the bulb, thoroughly
clean it with a cloth moistened with alcohol
or lacquer
thinner.
• headlight bulb holder (with bulb)
• headlight bulb holder cover
• Close the hood.
CHANGING THE TAIL/BRAKE LIGHT BULB
1. Remove:
• Rear panel
• tail/brake light bulb holder ①
• bulb
NOTE:
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING
:
Keep flammable products and your hands
away from the bulb while it is on, since it
will
be hot. Do not touch the bulb until it cools
down.
2. Install:
• bulb new
Secure the new bulb with the tail/brake light
bulb holder.
NOTE:
Avoid touching the glass part of the bulb.
To Next Page
Loading...