STEERING MACHINE PARTS
THE STRUCTURE OF THE STEERING
1. Check:
• pressure pad ①
• Rubber dust cover ②
Wear/damage Replace.
Damage/degradation Replace
NOTE:
When replace the dust boots of the ball ,
must enter 1/2 volume in lithium grease in
to the dust boots.
2. Check:
• Ball joint steering mechanism ①
• turning ②
• rocky ledge ③
Free play Replace the tie-rod end.
Turns roughly Replace the tie-rod end.
3. Check:
• tie-rods
Bends/damage Replace.
To Next Page
Loading...