Hisun HS5DUTV-2 - Page 236

CHASSIS
- 236-
CHECKING THE WHEEL TYRE
1. Check:
• wheel tyre
2. Measure:
• wheel runout
Over the specified limit Replace the
wheel or check the wheel bearing play ①.
3. Check:
• wheel balance
Out of balance Adjust.
Wheel runout limit
Radial ②: 2.0 mm (0.08 in)
Lateral ③: 2.0 mm (0.08 in)
WARNING:
The profile depth falls below 3mm, Please
replace the tyre immediately.
• tire wear limit ○,
a