Hisun HS5DUTV-2 - Page 238

CHASSIS
- 238-
INSTALLING THE WHEEL HUB
1. Install:
• axle nut
260 Nm (26.0 m · kg, 190 ft · lb)
INSTALLING THE WHEEL TYRE
1. Install:
• wheel
NOTE:
The arrow mark ① on the tyre must point in
the direction of rotation □,
A
of the wheel.
2. Tighten:
• wheel nuts ①
WARNING:
Tapered wheel nuts ① are used for both the
front and rear wheels. Install each nut
The angle of the conical bores is
60°