·Check whether these components are greased
with butter and then tighten the up-and-down
rocker arm assembly and L/R fore dampers and
ther components. Fix the L/R tension rods into
hole by way of the trough of open-groove nut
with cotter pin (4 pcs), and make these tension
rods bisection on feet.
CHECKING THE STEERING KNUCKLES
1. Check:
• steering knuckles
Damage/pitting Replace
CHECKING THE FRONT ARMS
1. Check:
• front arms
Bends/damage Replace.
2. Check:
• Middle bushing
Wear/damage Replace.
3. Check:
• ball joints
Damage/pitting Replace the ball joint.
Free play Replace the ball joint.
Turns roughly Replace the ball joint.
CHECKING THE FRONT SHOCK ABSORBER
1. Check:
• shock absorber rod
To Next Page
Loading...