ELECTRICAL COMPONENTS
- 283 -
Always follow these precautions when charging the batteries:
1. Position the vehicle on a level surface.
2. Make sure the charging area is well ventilated.
3. Make sure the key is off.
4. Open the hood and any door enclosures or zippers.
5. Always use a extension cord with a minimum rating of 20 amps.
6. Inspect the charging cord and extension cord for cracks, loose connections and
frayed wiring. Replace any damaged components promptly.
7. Always connect the vehicle charger to the extension cord first, then plug the cord into
a wall receptacle.
8. Make sure the charger uses a dedicated circuit to prevent overloading. If
charging multiple vehicles, each vehicle should use a dedicated circuit.
Tip: After the batteries have fully recharged, the battery charger will automatically
cycle in and out of the trickle charge mode to maintain the charge.
9. When disconnecting the charger, always disconnect the extension cord from the
wall receptacle first, then disconnect the cord from the vehicle’s charging cord.
2018年4月1日 明天让刘川把这张图改一下。
Battery Access
To access the batteries, remove the seat. See page 46. Remove the storage tray (if
equipped).
NOTE
Before removing the
seat to access the
To Next Page
Loading...