CHECKING THE BULBS AND BULB
SOCKETS
Check each bulb and bulb socket for damage or
wear, proper connections, and also for
continuity between the terminals
Damage/wear Repair or replace the bulb,
bulb socket or both.
Improperly connected Properly connect.
Incorrect continuity reading Repair or replace
the bulb, bulb socket or both.
WARNING：
Since the bulb gets extremely hot, keep
flammable products and your hands away
from the bulb until it has cooled down.
CAUTION:
• Be sure to hold the socket firmly when
removing the bulb. Never pull the lead,
otherwise it may be pulled out of the
terminal in the coupler.
• Avoid touching the glass part of the bulb to
keep it free from oil, otherwise the
transparency of the glass, the life of the
bulb and the luminous flux will be
adversely affected. If the bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
To Next Page
Loading...