ELECTRICAL COMPONENTS
- 295 -
1. Fuse (main)
2. Battery
3. Charging voltage充电电压
1. Fuse (main)
• Check the battery condition. Refer to
“CHECKING AND CHARGING THE
Open-circuit voltage
12.8 V or more at 20 °C (68 °F)
CORRECT
3. Charging voltage
整车通电,测试12V/18Ah蓄电池两端电压
Tester (+) lead Battery (+) terminal
Tester (–) lead Battery (–) terminal
4. DC/DC转换器
5.
Wiring connections(the entire charging
system)
NOTE:
Remove some parts before maintenance
1. Cushion
Repair with following special toolings
NO CONTINUITY
• Clean the battery terminals.
• Recharge or replace the battery.
IF THE BATTERY IS NOT CHARGED:
IF THE BATTERY IS NOT CHARGED: