6. Damaged banjo bolt threads in caliper body.
Leaking Master Cylinder
1. Damaged piston secondary seal.
2. Damaged piston snap ring/ snap ring groove.
3. Worn or damaged master cylinder bore.
4. Loose banjo bolt washers.
5. Damaged banjo bolt washers.
6. Damaged banjo bolt threads in master cylinder body.
7. Loose or damaged reservoir cap.
SPECIFICATIONS
HOW TO CONVERSION TABLE OF UNIT
（1）How to use conversion table
All the specified documents in this manual are taken SI and Metric as unit. With the
following conversion table, metric unit could be conversed into imperial unit.
Sample:
METRIC MULTIPLY IMPERIAL
mm 0.03937 =in
2mm × 0.03937 =0.08in
Conversion table
To Next Page
Loading...