GB - 11 -
6281'
3,&785(
)($785(
,167$//
352*5$0
Setting Brightness
As you enter the picture menu, Brightness
will be the first selected option.
Press
button to increase brightness.
Press button to decrease brightness.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
Setting Contrast
Using
or
button select Contrast.
Press
button to increase contrast level.
Press button to decrease contrast level.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
Setting Colour
Using
or
button select Colour.
Press
button to increase colour level.
Press
button to decrease colour level.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
Setting Sharpness
Using
or
button select Sharpness.
Press
button to increase peaking level.
Press
button to decrease peaking level.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
Setting Hue
(During Playback NTSC system, this will ap-
pear in AV mode only when NTSC video
source is applied. Otherwise, HUE option is
invisible in Picture menu.):
Using
or
button select Hue.
Press
button to increase hue level.
Press
button to decrease hue level.
Center value is indicated with the two recip-
rocal arrows.
%5,*+71(66
&2175$67
&2/285
6+$531(66
+8(
02'(
6725(
Mode
This item is used to change the picture size.
By pressing
or
button you may
choose one off three options. These are,
4:3, 16:9 and AUTO.
4:3 This option forces the picture ratio to 4:3
mode.
16:9 This option forces the picture ratio to
16:9 mode.
AUTO This option is available only if your TV
has WSS feature. This allows to change the
picture mode automatically, according to the
transmission of the selected channel. For
example, your TV is 4:3 mode, but the trans-
mission of that channel is in 16:9 mode. If
you select the AUTO mode, the TV is
switched to 16:9 mode automatically. If the
TV is in 4:3 mode and the picture ratio of the
channel is also 4:3, there will be no affect
selecting the picture mode to AUTO mode.
WSS feature is only used in TV or F-AV
mode. For the Picture Mode selection in AV-
To Next Page
Loading...
Need help?
General