Message Content
Network configuration error for Shared FC at expansion
card.
What to do Check the connection to shared NIC. If this action takes no effect,
contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content Network configuration error for Shared FC.
Explanation A shared FC interface fault occurred.
What to do Check the connection to shared NIC. If this action takes no effect,
contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content Network Segment damage occurred.
Explanation A fault occurred in the network segment used for inter-LPAR
communication or for NIC sharing.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content PCI device error was detected.
Explanation An error was detected into the PCI device.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content Physical Processor Isolation.
Explanation The physical Processor was degraded.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content Shadow Command is rejected.
Explanation A request to LPAR manager Assist was discarded.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content SR-IOV device of LPAR was damaged and isolated.
Explanation VF NIC was isolated from LPAR forcibly due to the failure of the
PCI device specifying SR-IOV.
What to do Shut-down promptly the guest-OSs which are assigning the
isolated PCI device.
When the state of a PCI device is not recovered automatically,
perform the ForceRecovery operation to recover the isolated
state.
Messages
9-35
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
