18. Enter < another number > and then press Enter key.
< another number > : 2 or 4
19. Repeat from step 8 to step 17 for second port of the failed mezzanine
card.
20. Power off the server blade.
Confirming parameters of FC mezzanine card when BIOS version is 2.12a13
1. The BIOS utility is displayed. Select < number > and then press Enter
key.
< number > : 1 or 3 the first port number of the failed card
Note: When two Emulex FC mezzanine cards are installed in mezzanine
slot #2 and #4, the first port of the mezzanine card in slot #4 is indicated
in number 3 line.
2. Confirm and record Port Name and Node name.
3. Confirm and record the BIOS setting, which is Enabled or Disabled.
7-8
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
