Table 7-17 Details of the VNIC assignment Screen
No. Item Description
Default
Value
Supported
LPAR
manager
Version
(1) # Displays the LPAR numbers. - 01-0X~
(2) Name Displays the LPAR name. NO_NAME 01-0X~
(3) Sta Displays the LPAR status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due
to an unrecoverable failure. Reboot LPAR
manager when this happens. If rebooting
LPAR manager cannot solve the problem,
contact the reseller from which you
purchased this equipment or consult
maintenance personnel.
Dea 01-0X~
(4) #VNIC Displays the number of Logical NICs
assigned to LPARs.
0 01-0X~
(5) Virtual NIC
Number
Displays the Logical NIC number. - 01-0X~
(6) VNIC
Assignment
Assigns Logical NIC to each LPAR.
*: Not assigned
Va - Vd: Displays the identifier for the
network segment of the VNIC.
1a - 8h: Displays the identifier for the
network segment of the shared NIC.
Add "v" to the end of line when using VF
NIC.
"!" is displayed on the right of the slot
number when the PCI device is not
recognized for the reason that the PCI
device is removed through the hot-plug
operation or powered off due to a failure
causing the blockade of the PCI device.
* 01-0X~
(7) VNIC
Information
Displays the information on the Logical NIC
selected by the cursor.
No: Displays the Logical NIC number.
MAC Address: Displays the MAC address of
the Logical NIC.
Shared NIC#: Displays the shared NIC
number.
Tag: Displays the VLAN mode.
Undef: VLAN mode not defined.
Untag: Defined to the UnTagged port.
Prm: Displays the promiscuous mode.
R: Receives the same MAC address.
Tag: Undef
(Shared
NIC/Virtual
NIC)
Tag: Tag
(VF NIC)
Prm: T
(Shared
NIC/Virtual
NIC)
Prm: R (VF
NIC)
01-0X~
Operation by LPAR manager Screen
7-45
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
