Hitachi Compute Blade 500 Series - UEFI setup menu

Heading Sub-heading
Web
console
CLI
console
LCD
touch
console
IP address Management
module
1
Y Y Y
Server blade
1
Y Y
Switch module
1
Y Y
Link Fault Tolerance (LFT) Y
Security Security strength Y Y
TLS/SSL version settings Y Y
IP address restriction
1
Y Y Y
Authentication encryption setting Y
System unit
settings
Chassis ID Y Y
Language Y Y
Power supply
control
Turning off system unit Y Y Y
Operating power supply for server
blade
Y Y
Operating power supply for switch
module
Y
Server blade operation setting
when power failure recovery
Y
Remote control for
server blade
Starting from Web console Y
Using OS console Y
Identification LED
(LID) operation
Front panel Y Y Y
Management module Y Y Y
Server blade Y Y Y
Identification LED
(LID) operation
Switch module Y Y Y
Each modules
configuration
Server blade (BMC settings) Y Y
Server blade (UEFI settings) Y
Hitachi LAN switch module settings Y
Link to Web console of Brocade 8
Gb/sec Fibre Channel switch
module and Brocade 16 Gb/sec
Fibre Channel switch module
Y
Link to CLI console of switch
module
Y
WWN and MAC
addresses
Selecting WWN and MAC
addresses in basic mode
Y Y
Management module overview
1-7
Hitachi Compute Blade 500 Series Management Module Setup Guide