Table 2-123 CLI console command
Item Command
Exporting MIB export snmp mib
Displaying MIB version show snmp mib
Setting SNMP manager
Perform the following procedure to the SNMP manager. For details about
setting SNMP manager, see the SNMP manager documents.
•
Registering MIB file
• Registering trap event
• Selecting MIB information items and setting the required parameter to get
the information by polling.
For details about the content of trap event and collectable MIB information
items, see the Hitachi Compute Blade 500 Series MIB User's Guide.
Setting management module
Perform the following settings to the management module. The agent
settings are relating to the management module information and the
manager settings are relating to the SNMP manager. For details about setting
items, see the Hitachi Compute Blade 500 Series Web Console User's Guide.
• Agent settings
Seven items of Agent settings are shown below.
¢
Enabling/disabling SNMP
¢
System Contact Name
¢
Port number
¢
Trap level
¢
SNMP version
¢
Character string for creating engine ID
• Manager settings
Ten items of Manager settings are shown below.
¢
IP address/host name
¢
Port number
¢
SNMP version
¢
Community name
¢
User name
¢
Access type
¢
Authentication type
¢
Authentication password
2-236
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
