Requirements
•
LCD touch console
• USB flash drive (version: USB 2.0)
Tip: Files cannot be imported if the LCD touch console function is disabled or
if USB ports are disabled.
Importing procedure
1. Create an import file referring to Import file format and modification on
page 2-256, and store it into a USB flash drive.
Note: Create a folder name and file name for an import file in
alphanumerics. The file path consisting of both names must be up to 255
alphanumerics.
2. Connect the LCD touch console and a USB flash drive with the import file
to USB ports on the front panel of the server chassis. When the USB flash
drive is recognized, USB device unmount button appears on LCD touch
console home.
Tip: If USB device unmount button does not appear, touch Refresh.
3. Touch System settings
on LCD touch console home to start import.
4. Touch Import on System settings menu.
5. Touch a setting file for import on Import (Select file) window. Then touch
Open/OK with the setting file selected.
Tip:
•
Touching a file turns the background to blue.
• The current directory is shown flush right between Import (Select file)
and file names.
6. When the following dialog box appears, touch OK.
7. Importing (Execution) message appears. Wait until the view is
changed.
8. Check the result on Import (Result).
Functional detail
2-251
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
