Hitachi Compute Blade 500 Series - Page 293

Item Descriptions Remarks
see
Table 2-146
Operation category
on page 2-267.
Operation result
(result)
The result of operation (Success/
Failed/Occurrence).
Success
Failed
Occurrence
Operator
(SubjectID)
The operator of the event.
•
User operation: Log in account
• System process operation:
Process ID
This corresponds to
the subject item of
the operation log.
Hardware identification
information
(HardwareID)
The operated equipment serial
number.
Location information
(LocInfo)
Management module audit log:
For operations that can be performed
with server blade privileges: This
records the server blade number in the
range from 0 to 7.
For other operations: This records 8.
If a user logs in with
server blade
privileges, only
operation log entries
for server blades that
the user can operate
are provided. This
corresponds to the
par_no item of the
operation log.
Location identification
information
(LocID)
This information is not recorded in this
equipment.
FQDN
(FQDN)
This information is not recorded in this
equipment.
Redundancy
identification information
(HaID)
This information is not recorded in this
equipment.
Agent information
(AgentInfo)
This information is not recorded in this
equipment.
Request source host
(ReqSourceHost)
This information is not recorded in this
equipment.
Request source port
number
(ReqSourcePort)
This information is not recorded in this
equipment.
Request destination host
(ReqDestHost)
This information is not recorded in this
equipment.
Request destination port
number
(ReqDestPort)
This information is not recorded in this
equipment.
Functional detail
2-269
Hitachi Compute Blade 500 Series Management Module Setup Guide