Hitachi Compute Blade 500 Series - Page 73

Tip: You can separately operate LID of each server blade even in SMP
configuration.
Table 2-60 Web console operation
Item Operation
Displaying/operating LID of the
front panel
Resources
tab > Modules > All modules >
Chassis > Front panel tab
Displaying/operating LID of the
management module
Resources tab > Modules > All Modules >
Management Module > Management Module x
Displaying/operating LID of server
blade
Resources tab > Modules > All Modules >
Server Blade > Server Blade x
Displaying/operating LID of switch
module
Resources tab > Modules > All modules >
Switch Module > Switch Module x
Note:
*x: One of Server blade 0 – 7.
Table 2-61 CLI console command
Item Command
Displaying LID of the front panel
show front-panel led
Operating LID of the front panel
set front-panel led
Displaying LID of the management module
show mgmt-module status
Operating LID of the management module
set mgmt-module led
Displaying LID of server blade
show blade status
Operating LID of server blade
set blade led
Displaying LID of switch module
show sw-module status
Operating LID of switch module
set sw-module led
Table 2-62 LCD touch console operation
Item Description
Displaying/operating LID of the front
panel
Hardware maintenance > Server
Chassis(SC) > LID ON/OFF
Displaying/operating LID of the
management module
Hardware maintenance > Management
Module(MM) > LID ON/OFF
Displaying/operating LID of server
blade
Hardware maintenance > Server Blade(SB)
> LID ON/OFF
Displaying/operating LID of switch
module
Hardware maintenance > Switch
Module(SW) > LID ON/OFF
Functional detail
2-49
Hitachi Compute Blade 500 Series Management Module Setup Guide