Hitachi Compute Blade 500 Series - Page 58

Items Specifications
VGA Resolution 640x400 - 1680x1050
Refresh rate 60 - 85 Hz
Bit per pixel 8, 16, 32
Internal USB port USB2.0 x 2port (For LPAR manager)
Onboard LAN Midplane I/F 10 Gb Ethernet 4 port
Function Wake on LAN, PXE boot, iSCSI, FCoE
Management
function
Remote console Supported
COM Serial redirection
DC input supply voltage DC + 12 V
Front interface USB
1 (USB 3.0)
2
KVM connector
1 (VGA / COM / USB2.0 / 2port)
2
DCMI (Data Center Management Interface) Not supported
Power consumption 738 W
External dimension (W x D x H: mm) 435.3 x 492.7 x 55.5 (2S)
Mass
Maximum: 13.8 kg
3
Notes:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
2. In SMP configuration between blades, VGA and COM are not available and only USB port is available
on non-primary server blades.
3. The Mass of a server blade includes that of SMP connection board.
Table 2-18 Xeon Server Blade CPU specification (CB 520X B2)
Items Specifications
Supported CPU E7-8880v3 E7-8890v3 E7-8893v3
Number of Cores 18 C 18 C 4 C
CPU frequency 2.3 GHz 2.5 GHz 3.2 GHz
QPI frequency 9.6 GT/s 9.6 GT/s 9.6 GT/s
L3 cache 45 M 45 M 45 M
TDP 150 W 165 W 140 W
Number of CPUs Maximum: 2
Table 2-19 Xeon Server Blade other specification (CB 520X B2)
Items Specifications
Main memory DIMM type (per slot) DDR4 RDIMM: 8 GB, 16 GB, 32 GB
2-12
Specification
Hitachi Compute Blade 500 Series System Overview Guide