Hitachi Compute Blade 500 Series - Language

Item Description
LP feature LP ID Shows the LPAR manager ID.
IP Address Shows the LPAR manager address.
Subnet Mask Shows the subnet mask.
Default
Gateway
Shows the default gateway.
VNIC System
No.
Shows the VNIC System number.
Alert
Language
Shows a language used for LP alert
messages only when the server
blade is powered on.
English: Alert messages in English
Japanese: Alert messages in
Japanese
Virtual
Console Port
Shows TCP port to connect to the
virtual COM console via Telnet only
when the server blade is powered
on.
Date and Time Time Zone Shows the time zone.
Sync NTP Shows a server to synchronize time
only when the server blade is
powered on.
NTP: Synchronized with NTP server.
SVP: Synchronized with SVP.
OFF: Not synchronized with server.
NTP Import Shows where the NTP setting is
imported from only when the server
blade is powered on.
SVP: Imported NTP settings from
SVP.
BMC: Imported NTP settings from
BMC.
NONE: Not imported NTP settings.
NTP Server1 Shows the IP address of the server
to synchronize time only when the
server blade is powered on and NTP
is set in the Sync NTP.
NTP Server2 Shows the IP address of the server
to synchronize time only when the
server blade is powered on and NTP
is set in the Sync NTP.
Server Blade CLI Setting Shows CLI IP address settings.
Server Blade
BSM Interface
Setting
3
IP address Shows the BSM IP address.
Alert port Shows the BSM alert port.
2-94
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide