Item Description
WWPN combo
box
Selects WWPN (vfcID). Only with Set checked,
this item is shown.
WWNN Shows WWNN only when WWPN is selected.
Boot Function Enables/Disables the port.
Enable: Connection is available from the port
to LU.
Disable: Connection is not available from the
port to LU.
Assigned Shows the number of LPARs to which the port
is assigned.
Note:
1. Shows HBA ports on the server blade.
Table 2-119 Action button at the bottom
Item Description
Assign all [Management module firmware version A0125 or later]
Checks all HBA ports that are not checked for assigned settings. Selects
the smallest value in all possible set of values for WWPNs (vfcID) and
WWNN.
(Already checked HBA ports settings are not changed)
Clear all Releases settings.
Default Returns WWPNs (vfcID) and WWNN for each port to their default values
(the smallest value in all possible set of values).
OK Saves HBA settings and closes the Set HBA port dialog box.
Cancel Cancels settings and returns to the Modify LPAR dialog box.
• Set NIC port
Operating the Web Console
2-109
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
