Item Description
Segment Shows a segment assigned to a NIC port.
Virtual NIC
Number radio
button
Selects a Virtual NIC Number
Note:
1. Shows NIC ports on the server blade.
Table 2-121 Action button at the bottom
Item Description
Assign all [Management module firmware version A0125 or later]
Checks all NIC ports that are not checked for assigned settings. Sets the
unchecked Virtual NIC Number in ascending order.
(Already checked NIC ports settings are not changed)
Clear all Releases settings.
Default Returns the Virtual NIC Number assignment to their default values.
OK Save NIC settings and closes the Set NIC port dialog box.
Cancel Cancels settings and returns to the Modify LPAR dialog box.
• Set USB port
[Management module firmware version A0205 or later]
Table 2-122 Items in Set USB port
Item Description
Port Assignment
panel
1
Assign
check box
Selects an USB port to assign to the LPAR.
Slot Shows USB ports on the server blade.
When multiple USB devices are available, the
following items are shown.
USB/KVM: Port to connect to the remote console
Operating the Web Console
2-111
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
