Item Description
USB (Front): Ports other than USB/KVM above.
In SMP configuration, the server blade number is
shown at the head of the slot name.
Used port Shows the number and name of an LPAR using
the port.
Unused is shown when no LPAR is used.
Note:
1. Shows USB ports on the server blade.
Table 2-123 Action button at the bottom
Item Description
Confirm Shows a confirmation dialog box for USB port setting.
Cancel Cancels USB port settings and closes the dialog box.
• Modify LPAR (confirmation)
Table 2-124 Items in Modify LPAR (confirmation)
Item Description
LPAR Settings/
LPAR Settings
before
1
Name Shows the LPAR name.
Processor Shows the number of logical processors
assigned to the LPAR and a scheduling mode
of the logical processor: shared or dedicated.
Memory Shows a memory amount assigned to the
LPAR.
2-112
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
