Table 2-126 Items in Add LPAR
Item Description
LPAR
1
Name text box Changes the LPAR name in the text box.
Processor spin box Changes the number of processors to
assign to the LPAR.
Shared radio button Assigns processors in shared mode.
Dedicated radio button Assigns processors in dedicated mode.
Memory spin box Changes memory size in units of 0.25
GB.
HBA
2
Set Port button Shows the Set HBA port dialog box.
NIC
3
Set Port button Shows the Set NIC port dialog box.
USB
4
Set Port button Shows the Set USB port dialog box.
Advanced Option
5
Boot Mode
pull-down list
[Management module firmware version
A0205 or later]
Shows a boot mode of the LPAR
Notes:
1. Shows the LPAR resource status.
2. Shows assigned HBAs.
3. Shows assigned NICs.
4. [Management module firmware version A0205 or later]
Shows assigned USB.
5. [Management module firmware version A0205 or later]
Shows setting items other than shown above.
2-114
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
