Hitachi Compute Blade 500 Series - Page 125

Item Description
Those items are hidden by default. Click the underline to show them.
Table 2-127 Action button at the bottom
Item Description
Confirm Shows the Add LPAR (confirmation) dialog box.
Cancel Cancels settings and returns to the Add LPAR dialog box.
• Add LPAR (confirmation)
Table 2-128 Items in Add LPAR (confirmation)
Item Description
LPAR
Settings
1
Name Shows the LPAR name.
Processor Shows the number of logical processors assigned
to the LPAR and a scheduling mode of the logical
processor: shared or dedicated.
Memory Shows a memory amount to assign to the LPAR.
HBA Assigned
number
Shows a card type, controller number, scheduling
mode, port number, vfcID, World Wide Node
Name, World Wide Port Name, and Boot settings.
[Management module firmware version A0205 or
later]
Shows the number of a server blade in which the
card is installed and the card type in SMP
configuration.
Operating the Web Console
2-115
Hitachi Compute Blade 500 Series Web Console User's Guide