Hitachi Compute Blade 500 Series - Page 128

Item Description
LinkDown: Cannot be used due to disconnecting
cable.(HBA)
ErrorCheck: Cannot be used due to irreparable
error.(HBA)
Standby: Standby status of virtual LAN segment
(PXE)
Down: Down status of virtual LAN segment (PXE)
Active: Active status of virtual LAN segment
(PXE)
Fault: Fault status of virtual LAN segment (PXE)
Bootable: Can be used as the boot device.
Not bootable: Cannot be used as the boot device.
Slot Shows the card type.
Controller
number
[Management module firmware version A0240 or
later]
Shows the controller number.
Scheduling
mode
[Management module firmware version A0240 or
later]
Shows the scheduling mode.
Port Shows the port number and segment number.
Boot function Shows the boot function configuration. Shows the
boot configuration of the target HBA port.
(When selecting the HBA tab)
WWN/MAC USB tab: Shows "-----" constantly.
HBA tab: Shows WWN of logical port or storage
device.
PXE tab: Shows MAC address of logical port.
Note USB tab: Shows the number of device that
connects to ports.
HBA tab: Shows the number of device that
connects to ports, or shows the LU number.
PXE tab: Shows the number of device that
connects to ports.
Start remote
console button
Starts the remote console to add or delete the
USB device.
(When selecting the USB tab)
HBA boot
settings button
Shows the HBA boot settings dialog box for the
selected port.
(When selecting the HBA tab)
Add to boot
order button
Adds the selected device to the boot order.
Notes:
1. Shows LPAR boot order.
2-118
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide