Hitachi Compute Blade 500 Series - Page 149

Item Description
AC Input Shows the status of AC input to the power supply module. With AC input,
AC input voltage is shown as 100V or 200V, which is automatically
determined.
Power supply module N information
The following tabs provide status of a power supply module selected.
Condition tab
Table 2-156 Power supply module N information items
Item Description
Power Shows a power state among the following states:
ON: Powered on.
OFF: Powered of.
-----: No power supply module is installed.
Status Shows an operation state of the power supply module among the following
states.
Normal: In normal state.
Warning: In warning state. Check the warning in the event list.
Operating the Web Console
2-139
Hitachi Compute Blade 500 Series Web Console User's Guide