Hitachi Compute Blade 500 Series - Page 160

Management LAN tab
Table 2-171 Management LAN items
Item Description
Port Shows either the management LAN 0 or the management LAN 1.
Link Fault Tolerance Shows the link fault tolerance is set to Enable or Disable.
Link Down Time
(sec)
When the active management module is linked down for the
specified time (sec), ports will be switched.
Link Up time (sec) When the active management module is linked up for the specified
time (sec), the port will be recovered to the management module.
Table 2-172 Action button at the bottom
Item Description
Edit Edits the management interface settings.
2-150
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide