Hitachi Compute Blade 500 Series - Page 212

When Last day in the month is specified, DST starts and ends the last day of
the specified month.
Table 2-247 Action button at the bottom
Item Description
Edit Edits time zones and dates for starting and ending DST.
NTP tab
Table 2-248 NTP items
Item Description
Time Synchronization Shows Enable or Disable the time synchronization
with NTP servers.
NTP Server 0 to 3 IP Address/
Host Name
Shows up to four NTP server IP addresses or host
names.
Status Shows the connection status with NTP servers as one
of the following: Not connected, Connected,
Synchronization, Not Synchronization
•
Not connected: Failed to obtain the time.
• Connected: Obtaining the time is possible.
• Synchronization: The time is being synchronized.
• Not Synchronization: The time is not
synchronized because a large time difference
exists.
2-202
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide