Add SNMP Manager Settings
Table 2-268 SNMP Manager settings items
Item Description
Host name Type the SNMP Manager IP address or the host name.
Port number Type the trap report destination port number of the SNMP Manager,
from 1 to 65535. Default value: 162
SNMP version Select a version used by the SNMP Manager: v1/v2c or v3.
Community name Available with SNMP Manager version v1/v2c:
Type a user name using up to 60 alphanumeric characters and
symbols.
User name Available only with SNMP Manager version v3:
Type a user name using up to 32 alphanumeric characters and
symbols.
Access type Available with SNMP Manager version v3:
Select an access type of the SNMP Manager: noAuthnoPriv,
AuthnoPriv, or AuthPriv.
Authentication type Available with SNMP Manager version: v3, and Access type:
AuthonoPriv or AuthPriv:
Select a method for SNMP Manager authentication: MD5 or SHA
Authentication
password
Available with SNMP Manager version: v3, and Access type:
AuthonoPriv or AuthPriv:
Type a password for the SNMP Manager authentication using from 8
up to 64 alphanumeric characters and symbols.
Operating the Web Console
2-213
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
