Server Blade N Summary
Table 2-26 Action combo box items on the upper right
Item Description
Maintenance
mode ON
Sets the slot of the server blade currently shown in maintenance
mode. If the slot has a server blade, the server blade is also set in
maintenance mode. The mode will be automatically cancelled in about
two hours after the mode is set.
Maintenance
mode OFF
Release the slot of the server blade currently shown from
maintenance mode. If the slot has a server blade, the server blade is
also released from maintenance mode.
Update Firmware Updates the firmware of the server blade currently shown on the
window. Follow directions in the dialog boxes to update the firmware.
Updating the firmware on the primary server blade updates all server
blades in SMP configuration simultaneously.
Restore server
blade settings
Restore a server blade's BMC and EFI settings. Read the direction in
dialog, and then restore the settings.
Backup of server blade's BMC and EFI settings is collected
automatically when settings of BMC or EFI is changed, or Smart
Configure is executed. The maximum number of backup is 5.
Restore I/O card
settings
Restore settings of the mezzanine card. Read the direction in dialog,
and then restore the settings.
Backup of mezzanine card's settings is collected automatically when
settings of mezzanine card is changed, or Smart Configure is
executed. The maximum number of backup is 5.
Mezzanine cards shown below are support restore function.
- Hitachi fibre channel adapter
CNA Information
settings
Used only for maintenance work. Do not use for normal operation.
Can delete iSCSI settings from information to be taken over with N
+M failover on Emulex 10 GB CNA/LAN mezzanine card and onboard
CNA.
Restore CNA card
information
Used only for maintenance work. Do not use for normal operation.
Restores information of Emulex 10 GB CNA/LAN mezzanine card and
onboard CNA using automatically backed up data. Restore
information following the dialog box shown up.
Backup files are automatically created when information of Emulex 10
GB CNA/LAN mezzanine card and onboard CNA is changed and at
Smart Configure. The maximum number of backup is 5.
Delete CNA card
information
backup
Used only for maintenance work. Do not use for normal operation.
Deletes backed up information of Emulex 10 GB CNA/LAN mezzanine
card and onboard CNA. Delete information following the dialog box
shown up.
CNA version
history
Used only for maintenance work. Do not use for normal operation.
Shows the version for Emulex 10 GB CNA/LAN mezzanine card and
onboard CNA.
Register TPM
Lisence key.
Register a license key to enable the TPM. Registration of the license,
choose enter the license key directly, or to input a license key file.
Operating the Web Console
2-29
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
