Hitachi Compute Blade 500 Series - Page 40

Item Description
Register LOM
License key.
Register a license key to enable the LOM. Registration of the license,
choose enter the license key directly, or to input a license key file.
Assign LP
Firmware
Assign an LPAR manager firmware to a server blade. Assign LP
firmware (Selecting LPAR manager F/W version) dialog box is shown.
When assigning LPAR manager firmware to a server blade in SMP
configuration, assign the firmware to the primary server blade.
Backup LP
settings
Back up LPAR manager settings (LPAR manager configuration
information). Backup LP settings dialog box is shown.
In SMP configuration, select the primary server blade when backing
up LP settings.
Restore LP
settings
Restore LPAR manager settings (LPAR manager configuration
information). Restore LP settings dialog box is shown.
In SMP configuration, select the primary server blade when restoring
LP settings.
Initialize LP
settings
Initialize LPAR manager settings (LPAR manager configuration
information). Initialize LP settings dialog box is shown.
• Backup LP Settings
Table 2-27 Items in Backup LP Settings dialog
Item Description
Backup Current LP Settings
1
Server Blade No. Server Blade No. is shown.
LP firmware LPAR manager firmware version is
shown.
Note:
1. Server Blade No. and LPAR manager firmware version is shown.
2-30
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide