Table 2-30 Action buttons at the bottom
Item Description
Confirm Restore LP Settings (for confirmation) dialog is shown.
Cancel Close Restore LP Settings dialog.
Note: In SMP configuration, select the primary server blade when
restoring LP settings.
• Restore LP Settings (for confirmation)
Table 2-31 Items in Restore LP Settings (for confirmation) dialog
Item Description
Restore LP
Settings
1
Server Blade No. Server Blade No. is shown.
LP firmware The bank and LPAR manager firmware
version assigned to a server blade are
shown.
Setting File The backup file used to restore LPAR
manager settings (LPAR manager
configuration information) is shown.
Note:
1. Server Blade No., LPAR manager firmware version, and the backup file used to
restore LPAR manager settings (LPAR manager configuration information) is
shown.
Table 2-32 Action buttons at the bottom
Item Description
Back Restore LP Settings dialog is shown.
OK Restore LPAR manager Settings (LPAR manager configuration information).
2-32
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
