Table 2-40 Settings tab items
Item Description
Power AC recovery Power ON:
Powers on the server blade when the power is supplied to
the server chassis.
Power OFF:
Remains the server blade in power-off when the power is
supplied to the server chassis.
Last state:
Returns the state of the server blade to that in the last
time when the server chassis is powered off.
Recovery wait
time
When the operation after power recovery is Power ON or
Last state, the wait time for the server blade to be
powered on from 0 up to 60 minutes.
Power On
suppression
Restricted: Power ON to the server blade is restricted.
This temporarily occurs in server blades, active and
standby, when N+M cold standby switches server blades.
Power ON available: Power-on restriction is disabled.
Smart
Configure
Status Smart Configure is in operation. Shows one of the
following:
No Information; In Progress; Not Configured; Configured
N+M cold
standby
Enables and Disables N+M cold standby: Enabled/
Disabled.
With Enabled, N+M cold standby is built, and Smart
Configure is automatically performed once. Smart
Configure is also automatically performed when the server
chassis is powered on or a server blade is inserted.
WWN type Select WWN for the fibre channel adapter on the server
blade to use: default physical or optional physical. With N
+M cold standby enabled, WWN type is fixed to Optional
Physical WWN.
MAC type Select MAC address for the LAN adapter on the server
blade to use: default physical or optional physical,
regardless of N+M cold standby settings.
LP Logical
Partitioning
Shows whether or not to operate LPAR manager on the
server blade.
Enabled: Performs LPAR manager. Setting details are
shown in the
LPAR tab on page 2-87.
Disabled: Normal OS starts without performing LPAR
manager.
LP version Shows the LPAR manager firmware version assigned to
the server blade in LP mode. For Basic-mode server
blades, "--------" is shown.
LP Model Shows an LPAR manager model.
Upper bound of
version
Shows the latest version of LPAR manager firmware
available.
2-42
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
