BMC tab
Table 2-43 BMC time items
Item Description
Time adjustment method Select one of the two shown below:
•
Manually or by IPMI command.
Set time manually or using the Set SEL Time
command. Time is not automatically set. When using
SC/Agent, set time this way.
• Using NTP servers
Synchronize time with the management module using
NTP.
Time zone Type BMC time zone from – 12:00 to + 14:00.
Daylight
saving time
Use Select a BMC daylight saving time: Enable or Disable.
Start date Type a month and day in MM-DD format, using numbers 0
to 9 for each M and D. 00-00 and a date valid on the
calendar.
Start
condition
Select and set the following:
• Start date
• The first Start day of the week after Start date
• The last Start day of the week before Start date
• The last Start day of the week
Operating the Web Console
2-45
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
