Item Description
• IPMI over LAN
Limit the source
IPv6 address
Use Select Enable or Disable.
Enable: Allows only IPv6 addresses, to which
"Allowed IPv6 address 1" through "Allowed
IPv6 address 4" are assigned, to connect.
Disable: Allows any IPv6 addresses to
connect. Even if Disable is selected, setting
fails if "Allowed IPv6 address 1 to 4" have an
incorrect value.
Allowed IPv6
address 1
Type IPv6 address to allow connection to BMC
in format of 8 groups of 4 hexadecimal digits
separated by colons (:),
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
the network prefix format,
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/
yyy. One or more consecutive groups of "0"
can be replaced with the double colon (::).
However, it may only be used once in an IPv6
address.
Example: FEDC:0:0:3210:0:0:7654:3210 to
FEDC::3210:0:0:7654:3210
IPv6 address has the prefix length between 1
and 128.
If the prefix length of the network address is
specified, IPv6 addresses of
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/
yyyy which shares initial bits of pre-fix length,
counting from the most-significant bit of the
IPv6 address are allowed to connect.
Example: If
FEDC:BA98:7654:3210:FEDC:BA98:7654:321
0/64 or FEDC:BA98:7654:3210::/64 are set,
all of IPv6 addresses in network of
FEDC:BA98:7654:3210:xxxx:xxxx:xxxx:xxxx
are allowed to connect.
Connection is restricted on the following
functions.
•
Server blade Web console
• Remote console
• IPMI over LAN
Allowed IPv6
address 2
Allowed IPv6
address 3
Allowed IPv6
address 4
Table 2-45 BMC user account items
Item Description
Password
aging
Use Select Enable or Disable.
Password
expiry period
(day)
If you selected [Disable] for [Use], 0 is set.
If you selected [Enable] for [Use], enter an expiry period
in the range from 1 to 365.
Operating the Web Console
2-47
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
