Item Description
User account
1
Use Select Enable or Disable.
User account 1 cannot be disabled.
User name Start with an alphanumeric character, and create a
string with one to 16 characters using alphanumeric,
period [.], or underscore [_].
Available only with CB 520X and CB 520H B3 or later:
The following symbols are allowed to use in above
platforms.
. _ $ - = + * % ? @ /
\ ' ! ~ ; ^ ( ) [ ] { } | , `
The following symbols are NOT allowed to use in above
platforms.
< > & # " (empty)
Password Create a string with one to 20 characters using
alphanumerics or symbols without "&". If you don't enter
any password, the password will not change from the
previous one.
Available only with CB 520X and CB 520H B3 or later:
The following symbols are NOT allowed to use in above
platforms.
< > # " (empty)
Password
(Confirm)
Type the same password.
Password
expiration date
Displays the password expiry date. If the password
aging functionality is enabled, you must reset the
password when the expiration date passes.
User account
2
Same as user
account 1.
Same as user account 1. However, for user accounts 2
through 4, you can specify [Disable] for [Use].
User account
3
User account
4
Table 2-46 IPMI/SMASH user accounts items
Item Description
Password
aging
Use Select Enable or Disable.
Password expiry
period(day)
If you selected [Disable] for [Use], 0 is set.
If you selected [Enable] for [Use], enter an
expiry period in the range from 1 to 365.
User account
1
Use Select Enable or Disable.
User name Cannot change the user account 1 name.
Create a string with 1 to 16 characters using
alphanumeric, period [.], or underscore [_].
Make sure to start with a number.
2-48
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
