Item Description
Enable: User authentication is required when connecting by
using the HvmSh command.
Disable: User authentication is not required when
connecting by using the HvmSh command.
LP CLI address Sets LP CLI address 1 to 8.
Table 2-84 Action button at the bottom
Item Description
Confirm Shows the Confirming dialog box.
Cancel Cancels the setting and returns to the LP Setting dialog
box.
Virtual COM Console Settings
You can specify the settings only if the server blade is powered on.
Table 2-85 Items in the Edit virtual COM console settings dialog box
Item Description
Connection mode Select either Telnet or SSH for virtual COM connection mode.
Telnet
authentication
Enable or disable user authentication for a Telnet connection.
Enable: User authentication is required when connecting via a
Telnet connection.
Disable: User authentication is not required when connecting via a
Telnet connection.
Note that user authentication is required when connecting by
using SSH.
Virtual COM console
port
Specify the TCP port to be connected to a virtual COM console via
Telnet or SSH.
Table 2-86 Action button at the bottom
Item Description
Confirm Shows the Confirming dialog box.
Operating the Web Console
2-83
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
