Authentication Log
You can specify the settings only if the server blade is powered on.
Table 2-91 Authentication Log items
Item Description
Login Displays the date and time the user logged in.
Result Displays whether login was a success or failure.
User name Displays the user name used for connection.
Logout Displays the date and time the user logged out.
While the user is logged in, "Currently logged in" is displayed. If the login
failed, "-----" is displayed.
Note: In the LP Web system (Logical VGA snapshot), the time the user
logged out by clicking the [Logout] button is displayed. If the user does not
use the [Logout] button to log out, the user is regarded as logged in as far
as the log is concerned. The date and time the user logs in the next time is
then recorded as the logout time. If you want to record the time and date
of a logout, use the [Logout] button to log out.
From Displays the connection source IP address.
Interface Displays one of the following:
•
Virtual COM console
• LP web system
• LP CLI
LPAR No. If a virtual COM console is used, the connected LPAR number is displayed.
Port Displays the port number of the connected client.
2-86
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
