Hitachi Compute Blade 500 Series - Page 97

Item Description
Notes Displays the network shutdown information.
Note: The information is displayed if the network is disconnected due to
either a shutdown of LPAR Manager or application of settings.
Table 2-92 Action button at the bottom
Item Description
Close Closes the Authentication Log dialog box, and returns you to the
LPAR Manager tab.
Recreate SSH Host Key
You can specify the settings only if the server blade is powered on.
Table 2-93 Action button at the bottom
Item Description
OK Creates an SSH host key.
Cancel Stops creating an SSh host key, and returns you to the LPAR Manager tab.
LPAR tab
•
LP mode: Disabled; server blade: powered off
Operating the Web Console
2-87
Hitachi Compute Blade 500 Series Web Console User's Guide