Table 2-90 Boot Manager menu items
Menu items Description
Primary Boot Sequence
Add Boot Option Adds a device or file system to the boot option.
See
Add Boot Option sub menu on page 2-103.
Delete Boot Option Deletes a device or file system from the boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page 2-104.
Change Boot Order Changes boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page 2-105.
Secondary (WOL) Boot Sequence
Add WOL Boot
Option
Adds a device or file system to the WOL boot option.
See Add Boot Option sub menu on page 2-103.
Delete WOL Boot
Option
Deletes a device or file system from the WOL boot option, which
is enabled in the next boot.
See Delete Boot Option sub menu on page 2-104.
Change WOL Boot
Order
Change the WOL boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page 2-105.
Boot Other
Boot From File Boots up from a specific device or file.
Boot From Device Boots up from a specific device path.
Select Next One-
Time Boot
Tries to boot from a specific target only on the next boot.
System
Boot Modes Displays the window to change system boot modes.
Reset System Restart the system.
Tip: If the OS image cannot be found through the boot device or PXE server,
the server blade may reboot again and again.
Confirm the connection of boot device or PXE server in this case.
Add Boot Option sub menu
Select Generic Boot Option, and press Enter.
Note: You can only add Standard Boot Options.
Do not add Advanced Boot Options.
Tip: To boot from a device not included in Boot Order, add it to Boot Option
for both Primary Boot Sequence and Secondary (WOL) Boot Sequence. Select
Add Boot Option in a category depending on your purpose.
UEFI setup menu
2-103
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
