Hitachi Compute Blade 500 Series - Page 165

Menu items Description Setting/display value
1. Do not set this item because it is not supported.
2. Use this item with the default setting.
3. When using the storage expansion blade, you must enable the Controller BIOS for
LSI SAS 2008 and confirm that Controller BIOS for LSI SAS 2208 is disabled. For
Controller BIOS of LSI SAS 2208, see
Controller properties submenu 3 on page
4-17.
Schedule CC page: schedule consistency check setting submenu
Click Supported of Schedule CC in the Properties: Controller Properties
submenu 2
window. The following window is displayed.
Note: Do not set the value of this item. This item is not supported
The following table shows description of menu items in the window.
Table 3-8 Schedule CC page menu items
Menu items Description Setting/display value
CC Frequency Sets the CC schedule function:
Enable or Disable
[Disable (invalid schedule)] /
Continuous / Hourly / Daily /
<<Weekly>> /Monthly
CC Start (mm/dd/
yyyy)
Sets on what date the
consistency check starts.
[01/01/2000] / Appropriate
value
1
MegaRAID WebBIOS for LSI SAS 2008
3-15
Hitachi Compute Blade 500 Series EFI User's Guide