Hitachi Compute Blade 500 Series - Page 166

Menu items Description Setting/display value
CC Start Time Sets on what time the
consistency check starts.
[12:00 AM] / 03:00 AM /
Appropriate value
1
CC Mode Sets if the consistency check is
executed on multiple disk
arrays.
[Sequential (a consistency
check per array)] /
<<Concurrent (a consistency
check on multiple arrays)>>
Select VDs to
Execute CC
Specifies a disk array on which
the consistency check is not
executed.
Choose any array configuration.
Note:
1. This value is set automatically when CC Frequency is set to Disable.
Power Save Setting: Power Save setting submenu
Click Settings of Manage Powersave in the Properties: Controller
Properties submenu 2 window. The following window is displayed.
The following table shows description of menu items in the window.
Table 3-9 Schedule CC page menu items
Menu items Description Setting/display value
Specify the power save
setting below
Display the power save setting
of disk.
‐
3-16
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide