Hitachi Compute Blade 500 Series - Page 167

Menu items Description Setting/display value
Unconfigured drivers Enabling not used disks. Select (to enable)/
[<<Not select (to disable)>>]
Hot spare drives Enabling the disk setting of
hotspare disks.
Select (to enable)/
[<<Not select (to disable)>>]
Configured drives Enabling the disk setting of disk
array.
[<<Select (to enable)>>]/
Not select (to disable)
Virtual drives: viewing and setting disk array information
You can display and change the information on the disk array (logical drive)
that is already set.
1. Click Virtual Drives
in the main menu.
2. The following window will be displayed.
Click a disk array for viewing information and changing the setting from
the list on the upper right pane. Check Properties > Go.
MegaRAID WebBIOS for LSI SAS 2008
3-17
Hitachi Compute Blade 500 Series EFI User's Guide