Hitachi Compute Blade 500 Series - Page 203

Table 3-18 Setting value
Setting value Description
Enabled Enables SAS RAID board BIOS
(Booting from the disk array is available.)
Disabled Disables SAS RAID board BIOS
(Booting from the disk array is unavailable.)
Tip: Be sure to click Submit after setting the item.
5. Check if the value of Controller BIOS is correctly set as you have set.
And click Home
MegaRAID WebBIOS for LSI SAS 2008
3-53
Hitachi Compute Blade 500 Series EFI User's Guide