Hitachi Compute Blade 500 Series - Page 227

Menu items Description Setting/display value
Device Name Device name Displayed only
Device Chemistry Device element Displayed only
C FullCharge Capacity Maximum electrostatic capacitance Displayed only
Remaining Capacity Remaining electrostatic capacitance Displayed only
D Auto Learn Mode Automatic diagnostics Displayed only
Controller properties submenu 3
Click Next
in the Controller properties submenu 2 window. The following
window is displayed.
Note: Stop CC On Error, Schedule CC, Maintain PD Fail History, and
Disk Activity are not supported. Do not set those items.
The following table shows description of menu items in the window.
Table 4-9 Controller properties submenu 3 items
Menu items Description Setting/display value
Stop CC On Error
1
Sets an operation when an
error is detected at the
consistency check.
[<<No (continuous
operation)>>] /
Yes (stops the consistency
check.)
Schedule CC
1
Sets a consistency check
schedule.
When clicking Supported, the
window moves to Schedule CC
MegaRAID WebBIOS for storage expansion blades
4-17
Hitachi Compute Blade 500 Series EFI User's Guide