Hitachi Compute Blade 500 Series - Page 229

Schedule CC page: schedule consistency check setting submenu
Click Supported of Schedule CC in the Controller Properties submenu 2
window. The following window is displayed.
Note: Do not set the value of this item. This item is not supported
The following table describes menu items in the window.
Table 4-10 Schedule CC page menu items
Menu items Description Setting/display value
CC Frequency Sets the CC schedule function:
Enable or Disable
[Disable (invalid schedule)] /
Continuous /Hourly / Daily /
<<Weekly>> / Monthly
CC Start (mm/dd/
yyyy)
Sets on what date the
consistency check starts.
[01/01/2000]v / Appropriate
value
1
CC Start Time Sets on what time the
consistency check starts.
[12:00 AM] / <<03:00>> AM /
Appropriate value
1
CC Mode Sets if the consistency check is
executed on multiple disk
arrays.
[Sequential (a consistency check
per array)] /
<<Concurrent (a consistency
check on multiple arrays)>>
Select VDs to
Execute CC
Specifies a disk array on which
the consistency check is not
executed.
Choose any array configuration.
Note:
MegaRAID WebBIOS for storage expansion blades
4-19
Hitachi Compute Blade 500 Series EFI User's Guide